Basement waterproofing repair cost in Washington
Modelled ranges with the Washington labour factor applied (×1.16 against the US average). Every figure here is a planning range built from published editorial prices, not a quote and not transaction data — which is more than most cost pages in this trade will tell you.
The three jobs that account for most of the spend
| Reference job | Range in WA |
|---|---|
| Interior drain along two walls + sump pump | $5,850–$12,600 |
| Exterior excavation of one 40 ft wall | $4,400–$12,550 |
| Underpinning on 10 piers | $17,400–$37,100 |
By approach, per unit
| Approach | Range in WA | Expected life |
|---|---|---|
| Interior perimeter drain (drain tile + sump) | $50–$150 per linear foot | Pipe itself: decades. The pump is the wear item — 7–12 years. |
| Exterior excavation + membrane + footing drain | $100–$300 per linear foot | Membrane 20–30+ years if backfill is done right. |
| Interior sealant / coating only | $0–$0 per linear foot | 3–10 years, less if there is real pressure behind it. |
| Carbon fibre straps on a bowing wall | $500–$1,100 per strap | Permanent if the cause of the load is also fixed. |
| Steel wall anchor / helical tieback | $750–$1,600 per anchor | Permanent. |
| Push pier / helical pier underpinning | $1,750–$3,700 per pier | Permanent, usually with a transferable warranty. |
| Polyurethane / epoxy crack injection | $450–$1,100 per crack | Long, provided the wall is not still moving. |
Add-ons and one-off items
| Item | Range in WA |
|---|---|
| Sump pump + basin, installed | $1,400–$3,250 |
| Battery backup pump (add-on) | $950–$2,300 |
| Water-powered backup pump (add-on) | $700–$1,850 |
| Buried discharge line to daylight | $1,050–$3,700 |
| Regrade soil away from the foundation | $1,400–$5,550 |
| Extend / bury downspouts (per downspout) | $200–$750 |
| Window well drain + cover (each) | $400–$1,300 |
| Portable dehumidifier (60-70 pint) | $250–$600 |
| Installed whole-basement dehumidifier, ducted | $1,500–$3,000 |
| Vapour barrier / wall panels (per sq ft of wall) | $0–$0 |
| Structural engineer inspection + letter | $450–$1,400 |
| Radon sub-slab depressurisation system | $1,400–$3,500 |
Why the ground changes the bill inside one state
Two houses in Washington with the same dimensions can need different work, because the soil decides which failure mode is likely. These are the counties where the ground pushes hardest:
| County | Risk index | Dominant drainage class |
|---|---|---|
| Pierce County | 51 | well drained |
| Clallam County | 49 | well drained |
| Grays Harbor County | 49 | well drained |
| Island County | 48 | well drained |
| Skagit County | 47 | well drained |
| Wahkiakum County | 47 | well drained |
| Skamania County | 46 | well drained |
| Whatcom County | 46 | well drained |
And the ones where the ground is least likely to be the cause, so a five-figure quote deserves a harder question: Franklin County, Okanogan County, Yakima County, San Juan County, Mason County.
Cost questions
Why is there a range instead of a price?
Because the honest spread is wide and anyone quoting a single number for a state is guessing at you. The same job differs by a factor of two between a national franchise and a two-truck local firm. What a range is good for is recognising a bid that sits outside it — a quote at half the low end is usually a coating being sold as a drainage system.
Where does the Washington factor come from?
It is a labour-cost index relative to the US average, not a contractor price list. Full method on the methodology page.
Is there real price data anywhere?
Not publicly, and that is the honest state of this trade — no free machine-readable dataset of US basement or foundation repair transactions exists. We are building one from what people report paying: add what you paid.
Get real quotes in Washington
We pass what you enter to the contractor networks listed below. You choose whether to hire anyone.
Page data updated